Have you checked your Falcon jack pads operation? Jack pads fit very tight and don't easily seat down properly when installed. The threads on the pad can be chased to ease the turning torque required to install the pad. The threads are 24 mm by 1.5 thread pitch. Finding out that your jack pad won’t fit or is stuck in place during an AOG situation is not pleasant.
For questions about this or other Falcon technical issues, contact your Duncan Aviation Falcon Tech Rep.
Falcon 2000EX Series: Service Bulletin Addresses 5G Radio Altimeter Interference Risks
Honeywell TFE731 N2 Monopole Improvement: SB Updates & Troubleshooting
Aircraft Engine Low Utilization Inspections (LUI): When They're Really Due
Falcon 2000 FQMC Fault Codes: Water Contamination & Fuel Probe Repair
Falcon 900: What Is Causing The Wire Staining On Your High Current Feeder Wires?